Polypropylene Fuming Hood

LCGC LABS Polypropylene Fuming Hoods are fabricated from white polypropylene, an extremely durable and non-corrosive thermoplastic; highly resistant to most acids, solvents and other liquids. Units are made to order in five basic sizes.  The basic console fume hood requires a remote exhaust system.

Unit consists of a white polypropylene structure with a sliding adjustable clear acrylic sash, internal fluorescent lighting, front panel for controls, a solid reinforced work surface with front lip, removable rear baffles for cleaning, and hinged doors for storage below the work surface.

polypropylene fume hood lcgc labs

Construction:
    1/2" & 3/8" white stress relieved polypropylene
    Adjustable rear wall baffles for exhaust air
    Heat welded support seams for additional strength
    Reinforced work surface for heavy loads
    Vented storage cabinet
    </*0.5" static pressure drop across hood
    Hoods are fabricated with all internal plumbing, electrical & instrumentation
    Mechanical leg leveling
    Rear exhaust plenum terminates at 10" dia. collar
    Angle sliding face shield with 12" opening at face
    6' & 8' shield in 2-sections with center support

Options:
    Available as Constant Volume Hood
    Electrical Duplex GFI receptacles with Poly carbonate cover
    Exhaust Failure Audio / Video Alarm
    Counter balance front SASH (With vertical front design)
    PP Sink with drain
    PP faucets with direct or remote control valves
    Teflon DI Water spray gun
    Teflon Nitrogen spray gun
    PP Vacuum fixture (Table mount)

Comments for this post are closed.